EBS Braking Systems
Knorr-Bremse • Trailer Module
Click on image to enlarge
- These modules require programming, for this you require part no. 0872834
- From Oct. 2006 you will require ECUtalk® softwear level 3.3 to carry out any diagnostic work on new ECU's
|
| Item | |
System | |
TRP part no. | |
| Trailer module (2S-4M / 2M) | |
TEBS4 | |
1521240 | |
| Trailer module (2S-4M / 2M-3M) with RSP | |
TEBS4 | |
1521235 | |
|
Knorr-Bremse • Modulator Valve
Click on image to enlarge
| Item | |
TRP part no. | |
| Modulator valve, single relay (4S/3M only) | |
1521144 | |
|
Knorr-Bremse • Chassis Cable
Click on image to enlarge
| Item | |
TRP part no. | |
| Socket & 12m cable | |
1521119 | |
| Socket & 15m cable | |
1521120 | |
|
Knorr-Bremse • Connecting Cable X1
Click on image to enlarge
| Item | |
TRP part no. | |
| 24N + 6m diagnostic wiring harness | |
1527194 | |
| 24N + 6m TIM connection cable harness | |
1521243 | |
| 24N + 6m power supply | |
1521250 | |
|
Knorr-Bremse • Connecting Cable X2
Click on image to enlarge
| Item | |
TRP part no. | |
| Cable 6m, 2 pin bayonet | |
1521238 | |
|
Knorr-Bremse • Sensor Extension Cable
Click on image to enlarge
| Item | |
TRP part no. | |
| Cable 3m | |
1521122 | |
| Cable 4m | |
1521123 | |
|
Knorr-Bremse • Retro Fit Kit
Click on image to enlarge
- Can be used to replace ABS systems on trailers with air suspension and with sensing rings 80/100 teeth
|
| Item | |
TRP part no. | |
| Kit | |
1487503 | |
● Installation of a retrofit kit is a notifiable alteration. A VTG10 form must be completed & sent to VOSA. The trailer must also be signed off by an official Knorr-Bremse service centre or authorised agent
|
Knorr-Bremse • Information Centre
Click on image to enlarge
| Item | |
System | |
TRP part no. | |
| Info centre | |
TEBS | |
1521546 | |
|
|